home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Gold Medal Software 3
/
Gold Medal Software - Volume 3 (Gold Medal) (1994).iso
/
comms
/
xfr_qm25.arj
/
!README.1ST
< prev
next >
Wrap
Text File
|
1993-11-18
|
8KB
|
227 lines
== External Protocols for QMODEM 4.3 thru QmodemPro 1.xx ==
*** T.M.S. Micro - (817)280-9974 ***
Ocean Breeze-BBS (817)280-9943 xx Hours a day Hurst, TX.
│
└────- Private System!
CLINKR - Sea-Link (Recv) Batch File
CLINKRO - Sea-Link (Recv) Batch File with OverDrive
CLINKS - Sea-Link (Xmit) Batch File
CLINKSO - Sea-Link (Xmit) Batch File with OverDrive
CMODMR - CMODEM (Recv) Batch File
CMODMS - CMODEM (Xmit) Batch File
COMPUB-R - Compuserv-"B" (Recv) Batch File
COMPUB-S - Compuserv-"B" (Xmit) Batch File
GSZMODMR - GSZmodem (Recv) Batch File
GSZMODMS - GSZmodem (Xmit) Batch File
HSLNKRZ - HS/LINK (Recv) Batch File
HSLNKSZ - HS/LINK (Xmit) Batch File
HYPER-R - HyperP (Recv) Batch File
HYPER-S - HyperP (Xmit) Batch File
JMODMR - Jmodem (Recv) Batch File *
JMODMS - Jmodem (Xmit) Batch File
KERMITR - PC-Kermit (Recv) Batch File
KERMITS - PC-Kermit (Xmit) Batch File
LYNXR - Lynx (Recv) Batch File
LYNXS - Lynx (Xmit) Batch File
MLINKR - Mlink (Recv) Batch File
MLINKS - Mlink (Xmit) Batch File
MPTR - MPt (Recv) Batch File
MPTS - MPt (Xmit) Batch File
NMODMR - NModem (Recv) Batch File
NMODMS - NModem (Xmit) Batch File
PUMAR - See MPTR
PUMAS - See MPTS
RCMODMR - RCModem (Cmodem) (Recv) Batch File
RCMODMS - RCModem (Cmodem) (Xmit) Batch File
SUPR8K-R - SuperK (Recv) Batch File
SUPR8K-S - SuperK (Xmit) Batch File
SZMODRZ - SZMODEM (Recv) Batch File
SZMODSZ - SZMODEM (Xmit) Batch File
TASYR - Tasy (Recv) Batch File
TASYS - Tsay (Xmit) Batch File
TMODMR - Tmodem (Recv) Batch File
TMODMS - Tmodem (Xmit) Batch File
WXR - WXmodem (Recv) Batch File *
WXS - WXmodem (Xmit) Batch File
ZMAXRZ - Zmax (Recv) Batch File
ZMAXSZ - Zmax (Xmit) Batch File
ZMODR - Zmodem (Recv) Batch File
ZMODS - Zmodem (Xmit) Batch File
ZMODRC - Zmodem (Recv) Batch File with ANSI Color
ZMODSC - Zmodem (Xmit) Batch File with ANSI Color
* means that "Y" MUST be answered for: 'Download File Prompt'
in QMPRO's install for External Protocols.
---------------------- SPECIAL NOTES ! ----------------------
ARGCHK - See header of the .BAT file for details...handy!
ENDSND - Handy if your not watching your PC, This
will send an Alarm when Xfer. is finished...
(You will find this in some of these BATCH Files)
E_SIG - Another type of sound to add to your .BAT files
if you want noise to get your attention!
=== CAUTION === It has been reported that some TSRs
screw this thing up, with unpre-
dictable results!! YOU HAVE BEEN WARNED...
BIMODEM - When using BIMODEM with QMODEM 4.x, I choose "B"
for the character to hit. This will override the internal.
NOTE: These .BAT files are for version BIMOD112
or older. *NOT* working with Bimodem 1.24 yet!
Also, the .BAT files for BIMODEM are for single
file transfers! If you want to do Batch-UP/DOWN
loads, then you might consider replacing BMODx.BAT
with BIMENU114 or later. This way you can choose
which files to transfer from this menu system.
CMODEM - The "Command Line String" *MUST* be followed to the
letter, or this Protocol 'WILL-NOT' work! I know;
it took me 15 minutes to make this work, do to
incorrect information in the Documentation...
(Now replaced by RCMODEM [CMODEM44])
GCOLOR.T - my color config file for GSZmodem
HSLINK.CFG - my config file for HS/LINK
*** NOTE *** PUMA is now called MPt, due to some legal stuf *****
MPt - This has got to be the greatest External Protocol
since 'DIRT'! Its speed is *GOOD* and if nothing
else, it's the neatiest looking thing to see running!!!
There is a Configuration Program with it (MPTSET)
And it is all you need to make it run. Switchs
may be set on the command line, but *NOT* necessary
with the CONFIG. Program. It seems to work best as
follows for RTS/CTS hardware handshake type Modems.
MPT 1.00 Setup Program --
┌────────────────────────────────────────────────────────┐
│ COM port : 1 Beep when finished : Yes │
│ UART baud : Current Use 16550A FIFOs : No │
│ Eff. baud : UART CTS/RTS handshake : Fast │
│ COM 1 base : 3F8 DCD monitoring : Yes │
│ COM 1 irq : 4 Modem hangup : No │
│ COM 2 base : 2F8 Wait for key : No │
│ COM 2 irq : 3 RLE compression : Yes │
│ COM 3 base : 3E8 Kill aborted files : No │
│ COM 3 irq : 4 Current date stamp : No │
│ COM 4 base : 2E8 Overwriting files : Yes │
│ COM 4 irq : 3 Resuming transfers : Yes │
└────────────────────────────────────────────────────────┘
┌────────────────────────────────────────────────────────┐
│ CDS log file = D:\QMDM\MPT.LOG │
│ DSZ log file = D:\DSZ.LOG │
└────────────────────────────────────────────────────────┘
The above is your choice as far as logging. (ONLY ONE!)
SUPERK -
Super8K Setup - (initalized by typing "superk @")
C)olors - This was pretty blah in default, so for S)uperK
mode, so I changed: S=62 & U=113
D) Logfile : SK4.LOG G) Write On 0 : No *$*
E) XferFile: XFER.TXT H) Save Aborts: Yes (Like Zmodem) *$*
F) OvlPath : I) Overwrite : No
W) WrkPath : J) Resume DLs : Auto *$*
PATSTACK - (Program used to Change Stack Size)
Minimum Stack : 768
Maximum Stack : 1024 *$*
NOTE: *$* means Changed from Default.
SZCFG.DAT - My SZModems config file.
Lynx - Personal choice. I changed colors in AUTOEXEC.BAT to my preference as:
SET LYNXCO=015,014,004,013,011,010
ZMODEM Switchs - If you DO-NOT have a "Registered" Copy
of ZMODEM, then you will HAVE TO "REMOVE"
pB4096 from 'ALL' .BATS, the -m -Z from
ZMODSC.BAT; and the -mrrs from ZMODRC.BAT.
(DSZ0626.ZIP [1990] or later)
DOS - If you ARE NOT running DOS 3.3, then the "@" of @ECHO OFF
will have to be removed! This is a handy way of keeping
the screen from printing ECHO OFF. (undocumented info)
DOS INFO - As of this document, all programs are running on DOS 5.0
and DRDOS 6.0 (there are definite advantages with DRDOS6)!
NOTE: All have been tested with QMODEM 4.3 thru QmodemPro 1.51 and were
located in my sub-directory \QMPRO. Also under \QMPRO, were created
\UPLD (Send File), \DNLD (Receive File) \BBS, (Bulletin Brd.
Send File), \HOST (Bulletin Brd. Receive File). sub-directories.
TREE -
\ <--<< (ROOT)
|
\QMPRO
|
---\BBS (optional)
|
---\DNLD
|
---\HOST (optional)
|
---\UPLD
Ted J. Mieske - T.M.S. Micro
Ocean Breeze-BBS
DATE: 11/14/93 Hurst, TX
Running an "AUNTIE" BBS 5.11
Private at this time!
NEW: See History File for
run-down on Updates.
!HISTORY.DOC